How to Lock Raydium LP Tokens on Solana (2026 Guide)

How to Lock Raydium LP Tokens on Solana (2026)

To lock Raydium LP tokens, visit stakepoint.app/locks, connect your Solana wallet, click "Create Lock", select your Raydium LP token, set the amount and duration, and confirm. Takes under 60 seconds. Your locked LP is publicly verifiable on-chain immediately.

How to Lock Liquidity on Raydium

To lock liquidity on Raydium, you lock the LP tokens you receive when adding liquidity to a Raydium pool. Visit stakepoint.app/locks, connect the wallet holding your Raydium LP tokens, click "Create Lock", select your LP token, set the amount and duration, and confirm. StakePoint supports Raydium AMM v4 and Raydium CPMM LP tokens natively. The lock is on-chain, publicly verifiable, and costs nothing beyond standard Solana fees.

Why Lock Raydium LP Tokens?

This guide covers everything about locking Raydium LP tokens on Solana — what they are, how to lock them in under 60 seconds, how investors verify them, and what lock duration to choose. Raydium is the most widely used AMM on Solana. If you've launched a token and created a liquidity pool, you're holding LP tokens that represent your share of that pool.

Here's the problem: investors know that too.

If your LP tokens are sitting unlocked in your wallet, any buyer can see that you could drain the pool at any time. It doesn't matter how legitimate your project is — unlocked liquidity is the number one red flag in crypto.

With over $240K TVL locked across StakePoint and Raydium remaining Solana's most active AMM heading into Q3 2026, investor scrutiny on unlocked liquidity has never been higher. Research from Solidus Labs found that roughly 93% of liquidity pools on Raydium showed characteristics of soft rug pulls — meaning liquidity was withdrawn and token prices collapsed. That's the environment your investors are operating in. Locking your LP tokens is how you separate yourself from the 93%.

What Are Raydium LP Tokens?

When you add liquidity to a Raydium pool, you deposit two tokens (for example, YOUR_TOKEN and SOL). In return, Raydium gives you LP tokens — SPL tokens that represent your proportional share of the pool.

These LP tokens work like any other Solana token. You can hold them, transfer them, or send them to a locker contract. While they exist in your wallet, you can use them to withdraw your liquidity at any time.

Locking them removes that ability until the lock expires.

Raydium Pool Types

Raydium has several pool types, and they all generate LP tokens:

Standard AMM pools are the classic constant-product pools. You deposit equal value of two tokens and receive LP tokens. These are the most common pools for new token launches and are fully supported by StakePoint's locker.

Concentrated Liquidity (CLMM) pools work differently — they use position NFTs rather than fungible LP tokens. These positions require separate handling and are less commonly used for memecoin launches.

OpenBook-integrated pools combine AMM liquidity with order book depth. The LP tokens from these pools are standard SPL tokens and can be locked normally.

For most token launches on Raydium, you're dealing with standard AMM LP tokens. That's what this guide covers.

How to Lock Raydium LP Tokens on StakePoint

Before You Start

Make sure you have:

• A Solana wallet (Phantom, Solflare, or any supported wallet)
• Your Raydium LP tokens in your wallet
• A small amount of SOL for the transaction fee (less than $0.01)

Step 1: Go to StakePoint Locks

Visit Raydium LP Locker and connect your wallet.

Step 2: Click "Create Lock"

Click the purple "Create Lock" button. A modal will open showing every token in your wallet.

Step 3: Find Your Raydium LP Token

Your Raydium LP tokens will appear in the list. They're usually named with the token pair (e.g., YOUR_TOKEN/SOL). Use the search bar if you have a lot of tokens.

If you don't see your LP tokens, make sure you've actually added liquidity on Raydium first — creating a pool and adding liquidity are what generate the LP tokens.

Step 4: Enter the Amount

Type the amount you want to lock, or click "MAX" to lock your entire LP balance. Locking 100% of your LP sends the strongest possible trust signal.

Step 5: Choose Your Lock Duration

Select from preset options: 7 days, 30 days, 90 days, 180 days, 365 days — or enter a custom duration.

Recommended minimum: 6 months. Anything less looks weak. One year is the standard for serious projects. If you're building for the long term, consider 2+ years.

Step 6: Confirm the Transaction

Click "Create Lock" and approve the transaction in your wallet. Your LP tokens are now locked on-chain. Nobody — including you and including StakePoint — can withdraw them before the unlock date.

Step 7: Share Your Proof

Your lock is publicly visible at stakepoint.app/lock-raydium-lp-tokens. Share the link in your Telegram, Discord, and on X. Pin it. Make sure every potential buyer can verify it.

What Happens After You Lock

Your liquidity stays in the Raydium pool, functioning exactly as before. Traders can still buy and sell your token. The pool still earns trading fees. The only difference is that the LP tokens are held by a smart contract instead of your wallet.

When the lock expires, you'll be able to withdraw your LP tokens from StakePoint. At that point you can re-lock them, withdraw your liquidity from Raydium, or do whatever you choose.

Important: Locked LP tokens cannot be withdrawn early under any circumstances. This is by design — it's the entire point of locking. Make sure you're comfortable with the duration before confirming.

How Investors Verify Your Lock

Smart investors don't take your word for it. They verify. Here's what they check:

On-chain explorers like Solscan show whether LP tokens are held by a locker contract, which is often the first thing buyers check before purchasing a token.

On-chain verification through StakePoint's public locker page shows the exact amount locked, the unlock date, and the wallet that created the lock. Anyone can search by token name or mint address.

Searching the LP token mint address on Solscan lets investors confirm that the tokens are held by a locker contract rather than a personal wallet.

The easier you make verification, the more trust you build. Drop the lock link everywhere your community gathers.

Lock Duration Strategy

Not all locks are equal. Here's how investors interpret different durations:

Under 3 months — Viewed with suspicion. Short locks suggest the team might be planning to exit soon. Avoid this unless you have a very specific reason.

6 months — The minimum viable lock. Shows basic commitment but doesn't inspire strong confidence.

1 year — The standard for legitimate projects. This is what experienced investors expect.

2+ years — Strong signal. Tells the market you're building something real and aren't going anywhere.

Permanent (burn LP) — The ultimate trust signal. Some projects burn their LP tokens entirely, making the liquidity permanent. However, this means you can never recover those funds. Locking for a very long period achieves a similar effect while keeping optionality.

Common Mistakes

Locking only a fraction of LP. If you lock 50% and keep 50% unlocked, you haven't really solved the trust problem. Lock as close to 100% as possible.

Choosing too short a duration. A 30-day lock is barely worth mentioning. It tells investors you'll have access to the liquidity again next month.

Not sharing proof. A lock that nobody knows about doesn't build trust. Pin the verification link in every community channel.

Forgetting to lock after adding more liquidity. If you add liquidity later, you'll receive new LP tokens that aren't locked. Lock those too.

Lock Your Raydium LP Tokens From Other Launchpads

If your token launched on a launchpad and migrated to Raydium, you may have received LP tokens during the migration process. These can be locked exactly the same way — StakePoint supports any SPL token on Solana, including all Raydium LP token variants.

For launchpad-specific locking guides, see:

**→ Solana Token Locking Guide — All Launchpads

**→ How to Lock PumpFun Tokens

**→ How to Lock Raydium LaunchLab Tokens

**→ How to Lock Meteora LP Tokens

**→ Complete LP Locking Guide

Troubleshooting

My LP tokens aren't showing in StakePoint

Make sure you've connected the correct wallet — the one that actually holds the LP tokens. If you just added liquidity, wait 30 seconds and refresh. If they still don't appear, confirm on Solscan that the LP tokens are in your wallet.

The transaction is failing

Make sure you have at least 0.01 SOL in your wallet for transaction fees. If the transaction still fails, try reducing the amount slightly — locking your full balance down to the last decimal can occasionally cause issues.

My lock isn't showing on StakePoint

Search for your token at stakepoint.app/locks to confirm the lock was created successfully, then share that link directly with your community.

I locked the wrong token

Locks cannot be reversed. If you locked the wrong token, contact StakePoint support via Telegram and we'll advise on next steps.

Frequently Asked Questions

Can I lock Raydium LP tokens for free?

Visit stakepoint.app/docs for full pricing details.

Does locking LP tokens affect trading?

No. Your liquidity stays in the Raydium pool and continues functioning normally. Traders can still buy and sell your token, and the pool still earns trading fees. Only the LP tokens themselves are locked — not the underlying liquidity.

How do I lock LP on Raydium?

Raydium itself doesn't have a built-in locker. You lock the LP tokens you receive from Raydium using a third-party locker like StakePoint. Go to stakepoint.app/locks, connect your wallet, select your Raydium LP tokens, choose a duration, and confirm.

How does liquidity become locked?

When you lock LP tokens on StakePoint, they're transferred to a Program Derived Address (PDA) — a smart contract account with no private keys. Nobody can withdraw them until the unlock date, including you and including StakePoint.

Is it good when liquidity is locked?

Yes. Locked liquidity means the team cannot drain the pool before the unlock date. It's the primary trust signal investors look for before buying a new token. Investors can verify locks directly on-chain via StakePoint's public explorer, which significantly improves buyer confidence.

What if I add more liquidity after locking?

New LP tokens you receive from adding more liquidity are not automatically locked. You'll need to create a new lock for them separately on StakePoint.

Can I unlock early if I need to?

No. Locks on StakePoint are immutable until the unlock date. This is by design — the inability to unlock early is what makes the lock trustworthy to investors.

Raydium LP Locker: Lock Your Liquidity in 2 Transactions

StakePoint is the dedicated Raydium LP locker for Solana. Lock your Raydium LP tokens in 2 transactions, get publicly verifiable on-chain proof, and share it with your community instantly. Works with all Raydium AMM pools — SPL and Token-2022.

If you're searching for how to lock liquidity on Raydium, or how to remove LP from circulation to build trust, this is the process: visit stakepoint.app/locks, connect the wallet holding your Raydium LP tokens, click Create Lock, set your duration, and confirm 2 transactions. Your lock is live and searchable immediately.

Start Building Trust Now

Every minute your LP sits unlocked, potential buyers are scrolling past your token. They're looking for the padlock icon. They're checking whether liquidity is secured. If it's not, they move on.

The process takes 60 seconds:

No platform fees. Just a standard Solana transaction. Your liquidity stays in Raydium working exactly as before, but now your investors can verify it's secured.

*Lock your Raydium LP tokens today. stakepoint.app/lock-raydium-lp-tokens — free, on-chain, verifiable.*